Menu
Your Cart

Chrome Meathook Bagger Bar 'ABS' 14" Handlebar Kit for 2016 Harley Davidson FLH Touring

Chrome Meathook Bagger Bar 'ABS' 14" Handlebar Kit for 2016 Harley Davidson FLH Touring
Chrome Meathook Bagger Bar 'ABS' 14" Handlebar Kit for 2016 Harley Davidson FLH Touring
Chrome Meathook Bagger Bar 'ABS' 14" Handlebar Kit for 2016 Harley Davidson FLH Touring
Chrome Meathook Bagger Bar 'ABS' 14" Handlebar Kit for 2016 Harley Davidson FLH Touring
Chrome Meathook Bagger Bar 'ABS' 14" Handlebar Kit for 2016 Harley Davidson FLH Touring
Chrome Meathook Bagger Bar 'ABS' 14" Handlebar Kit for 2016 Harley Davidson FLH Touring
Chrome Meathook Bagger Bar 'ABS' 14" Handlebar Kit for 2016 Harley Davidson FLH Touring
Chrome Meathook Bagger Bar 'ABS' 14" Handlebar Kit for 2016 Harley Davidson FLH Touring
Chrome Meathook Bagger Bar 'ABS' 14" Handlebar Kit for 2016 Harley Davidson FLH Touring
Chrome Meathook Bagger Bar 'ABS' 14" Handlebar Kit for 2016 Harley Davidson FLH Touring
Chrome Meathook Bagger Bar 'ABS' 14" Handlebar Kit for 2016 Harley Davidson FLH Touring
Chrome Meathook Bagger Bar 'ABS' 14" Handlebar Kit for 2016 Harley Davidson FLH Touring
Chrome Meathook Bagger Bar 'ABS' 14" Handlebar Kit for 2016 Harley Davidson FLH Touring
Chrome Meathook Bagger Bar 'ABS' 14" Handlebar Kit for 2016 Harley Davidson FLH Touring
Chrome Meathook Bagger Bar 'ABS' 14" Handlebar Kit for 2016 Harley Davidson FLH Touring
$599.00
Ex Tax: $599.00
  • Stock: In Stock
  • Model: Cable Kits
  • Weight: 11.50lb
  • Dimensions: 16.00in x 36.00in x 3.00in

Available Options

Chrome Meathook Bagger Bar 'ABS' 14" Handlebar Kit  

2016 Harley Davidson FLH

Street Glide/Electra Glide/Ultra Limited/Tri Glide 

Kit Includes:

  • 14" Classic Chrome Meathook Ape Hanger Bars
  • Clear Armor Coat Over Stainless Lines with Classic Chrome Fittings 
  • Extended Brake Lines, 1 Upper and 2 Lower 
  • Extended Hydraulic Clutch Line
  • Extended Control Switch Extensions  (CAN Bus)
  • Extended Electronic Throttle Extension (Fly By Wire)

Handlebar Dimensions:

  • 1.25"Bar Diameter
  • 36" End to End Width
  • 14" Rise
  • 5.25' Clamping Surface
  • 4.5" Pullback

Handlebar Description:

As an Authorized Dominator Industries Dealer We are Proud to Offer Dominator Meathook Bagger Bars for FLH! Dominator Industries bars are carefully designed to provide natural, relaxed grip angles combined with optimal pullback comfort. They are engineered them to be direct bolt-on replacements for stock equipment with No slag inside the bar tubes making installation easier. Laser cut, fully TIG welded, beveled & de-burred for easy internal wire pulling, and polished to a show their quality finish!


All Dominator Industries Handlebars are hand-made employing a multi-step manufacturing process using the finest materials. Tube diameter is 1.25” stepped down to 1” for stock/conventional controls.  Both grips have 0.5” x 2” slots laser cut for internal wiring. The throttle side is honed out and notched for fly by wire. Laser cut tubing yields the smoothest corners with no slag for easy wiring. The Knurled Center for non-slip grip on our handlebars is engineered to be a direct custom replacement for stock equipment. We pride ourselves on our smooth and clean arched corners whereas competitors often use straight sharp edges which are easier to manufacture but fall short of the premium styling distinguishing riders demand.


Cable/Electrical Description:

For Our Electrical Extensions We Use Special Purpose Automotive Wire that is Insulated with Chemically Cross-Line Polyethylene, Making it resistant to moisture, most solvents, and Gives it the Ability to Withstand Extreme Temperatures. These Features Make Our Wire Ideal for Engine Compartment Applications Where Higher Heat Resistance is Required. Our Flexible Polyvinyl Chloride (PVC) Tubing is Designed to Meet the Requirements of MIL-I-631, Grades A & B. This Type of Tubing is used in Appliances, Automobiles, Military Wiring Harnesses and Airborne Equipment. Our PVC Tubing is UV Resistant, Flame Retardant, Lead Free with a High Gloss Black Finish, Making it Perfect for Applications Where a Wide Thermal Range is Required. 


Our lines are UV protected Braided Stainless Steel with 2 different Finish options. Classic Stainless is our Standard option. These Lines are great choices for most, if not all of our Kits, as well as any application where that "Standard" Stainless Line is desired. Our Pearl Stainless is our "Best" Option and is made with Fiberglass Insulation for that "Notch Above" in Style and Performance. Both Our Pearl and Classic Lines come with a "Transparent" Armor Coat allowing the Braided Stainless Steel to be visible, while providing a long lasting appearance as well as protecting components from abrasion.


When many aftermarket hydraulic lines are installed, problems can arise from inferior chrome plating. There is nothing worse than rust prone, cheap imitation chrome. Based on this we go the extra mile to achieve a finish that is far superior. Our plating is done here in the US and has been proven to reduce chipping, scratching, rusting or fading. Giving you a product that is not only suitable for practical purposes but will also look great for years to come.

 

 



 

Write a review

Note: HTML is not translated!
Bad Good