"PreWired" Black Meathook Bagger Bar 12" 'ABS' Handlebar Kit For Harley Davidson FLH Touring 2021-2023

Based on 0 reviews. - Write a review

$699.00

Ex Tax: $699.00

Stock: In Stock
Model: Cable Kits
Weight: 11.50lb
Dimensions: 16.00in x 36.00in x 4.50in

Available Options

Twist Grip Sensor

Heated Grip

Qty

Add to Cart

Buy Now Ask Question">Ask Question

Add to Wish List Compare this Product

Description
Reviews

"PreWired" 12" Meathook "Bagger Bar" Handlebar Kit

2021-2023 'ABS' FLH

Harley Davidson Street Glide, Electra Glide & Ultra Limited

What is it worth to have your project be as simple as possible? We feel it’s worth everything, so we’ve gone ahead and done ALL the hard work for you! These bars are "Pre-wired" with your Handlebar Switch Wiring (Can-Bus) and set up with the ability to pull your existing Twist Grip Sensor (TBW) in literally 10 mins! Those of us who have swapped our bars know, beyond a shadow of a doubt, that wiring the new bars can be a daunting task. This is what we set out to fix...and we did it! We are able to provide you with a solution that literally eliminates the headache....We were able to have our twist grip sensor pulled in 10 mins, here's the key, WITHOUT removing the plug on the Twist Grip Sensor...That is no exaggeration! Once this is done all that is left is to swap your hydraulics and you are done! We all know what the dealer charges to do this, with that said any experienced tech for that matter, and we’re EXTREMELY confident that we can save you $$$!!! Who doesn’t wanna save $$$? Even if you deliver your bars to your Tech with all the wiring finished and all they have to do is literally bolt on the new bars....HUGE! Your Tech will thank you by charging you less $ to do your installation, it's a win WIN for everyone involved!!

Now that "Black'd" Out Bikes are common place from the Harley Davidson Factory, matching hardware for your Hydraulics is a MUST! We have gone through the process of not only providing GREAT Hydraulics, but making sure the Aesthetics of your Black'd out Bike is not lost on something as simple as your Hydraulics Hardware. It's the small things that add up to the BIG THING...The completed look of your bike! We made sure this is a part of our Kits!

Many of us Prefer Toasty Warm Hands when we ride. Anyone who has ridden in the Rain or the Winter Months knows all too well what a wonderful Luxury this is, Harley has made Heated Grips a Very Nice Option in this case! If your Bike is Equipped with Heated Grips we can also ADD Heated Grip Extensions to Your Brand New Prewired Bars! Our Extensions will come wired into your Brand New bars, along with written instructions explaining how to install your Harley Davidson Heated Grips with our Prewired Extensions....You Can Thank Us Later!

PLEASE NOTE: Our Standard Prewired Bar Kit does NOT Come With A Brand New Twist Grip Sensor. As an 'Option' We Can Add A Brand New Twist Grip Sensor to Your Prewired Bars. Simply Make A Selection in the Drop Down Menus

Kit Includes:

12" Rise Gloss Black Meathook Ape Hanger Bagger Bars

Comes Pre-wired with 2 "Plug n Play" Handlebar Switch Wiring "Can-Bus" Harnesses, 1 on each side of the bars

Choose from a Brand New Twist Grip Sensor Installed or from our "Ready to Pull" setup for using your own Twist Grip Sensor

Choice of Midnight, Gloss or Standard/Flat Black Hydraulic Line Color (All of our "Black Lines Come with our Black Chrome Fittings)

Stainless Steel Braided lines with a Gloss Black Armor Coat & Black Chrome Fittings · Extended OEM/Stock Style Hydraulic Brake Lines, 1 Upper and 2 Lower with Stock ABS Fittings as well as Stock Piping for 1-1 Swap on your ride!

4" Clutch Cable Extension (Allows the use of the Stock Harley 2 Piece Clutch Cable which eliminates the need to open the Transmission)

Matching Banjo Bolt and Washers

Optional Heated Grip Extensions

Handlebar Dimensions:

12" Rise

End to End Width 36"

5.25" Clamping Surface

4.5" Pullback

Slotted for Internal Wiring

Gloss Black Finish

Handlebar Description:As an Authorized Dominator Industries Dealer We are Proud to Offer Dominator Bagger Bars for Harley Davidson! With a "Limited Lifetime" warranty they are carefully designed to provide natural, relaxed grip angles combined with optimal pullback comfort. Laser cut, fully TIG welded, beveled & de-burred for easy internal wire pulling, and polished to show their quality finish! Each and every set of bars are hand-made employing a multi-step manufacturing process using the finest materials with a tube diameter of 1.25" for fitment with your stock Fairing, also stepped down to 1” for stock/conventional controls. Both grips have 0.5” x 2” slots laser cut for internal wiring. The throttle side is honed out and notched for fly by wire. The Knurled Center for a non-slip grip on our handlebars is engineered to be a direct custom replacement for stock equipment. Proudly offering smooth and clean arched corners, Dominator Industries provides the premium styling distinguishing riders demand.

Cable/Electrical Description:

When many aftermarket hydraulic lines are installed, problems can arise from inferior chrome plating. There is nothing worse than rust prone, cheap imitation chrome. Based on this we go the extra mile to achieve a finish that is far superior. Our plating is done here in the USA and has been proven to reduce chipping, scratching, rusting or fading. Giving you a product that is not only suitable for practical purposes but will also look great for years to come.

Our Hydraulic Brake Lines meet or exceed D.O.T. as well as OEM pressure specifications. Our lines come with our Black Chrome Fittings and are UV protected Braided Stainless Steel with a Gloss Black Protective Armor Coat, that provides a long lasting appearance while protecting components from abrasion.

Our Electrical Extensions use special purpose automotive wire that is insulated with chemically cross-line polyethylene, making it resistant to moisture, most solvents, and gives it the ability to withstand extreme temperatures.
Our Flexible Polyvinyl Chloride (PVC) Tubing is designed to meet the requirements of MIL-I-631, Grades A & B. Our PVC Tubing is UV Resistant, Flame Retardant, Lead Free with a High Gloss Black Finish, Making it perfect for applications where a wide thermal range is required. Our Electrical Extensions use special purpose automotive wire that is insulated with chemically cross-line polyethylene, making it resistant to moisture, most solvents, and gives it the ability to withstand extreme temperatures.

Our Flexible Polyvinyl Chloride (PVC) Tubing is designed to meet the requirements of MIL-I-631, Grades A & B. Our PVC Tubing is UV Resistant, Flame Retardant, Lead Free with a High Gloss Black Finish, Making it perfect for applications where a wide thermal range is required.