Prewired Gloss Black 14" Miter Cut Ape's Handlebar kitfor 2018-2024 Harley Davidson Heritage with ABS

Kit Includes:

14" Gloss Black Prewired Miter Cut Ape Hanger's

Extended Upper ABS Brake Line

Clutch Cable Extension  (Allows the use of the Stock Harley Clutch Cable!)

Prewired with Control Switch and Turn Signal Extensions (*See Below for Description of Softail Prewired Bars)

Electronic Throttle by Wire Extension 

 Handlebar Dimensions:

Bar Diameter 1.25" stepped down to 1” for stock controls

End to End Width 33"

Base Width 11.5"

Pullback 4" 

14" Rise

Slotted for Internal Wiring

Gloss Black Finish

 

*Softail Prewire Description:
Unlike the Harley Touring Models, the Softail Line does Not have removable plugs Integrated In the Controls, making a Prewired Solution for your Softail a bit different. With this in mind we set out to come up with a solution that is far less difficult, and time consuming, than it would be removing, extending and running wires through your new bars from scratch. With our solution your are able to utilize your own stock switches with our “Prewired” bars. We provide your Brand New bars Prewired with our control wiring Harnesses as well as our "Solder Seal" pre-soldered/heat shrink connectors. You simply cut your existing control wire harnesses, strip a small portion, place them into our "Solder Seal" connectors and Heat them up! The heat liquefies the solder as well as protects the connection with it's own "Heat Shrink" all in a single step! eliminating a significant portion of the process of wiring your new bars! Each Set of Softail Prewired Bars ships with a complete set of instructions detailing the installation process. 

Handlebar Description:As an Authorized Dominator Industries Dealer We are Proud to Offer Dominator Meathook Ape Hanger's for Harley Davidson. With a "Limited Lifetime" warranty they are carefully designed to provide natural, relaxed grip angles combined with optimal pullback comfort. We have engineered them to be direct bolt-on replacements for stock equipment. No slag inside the bar tubes makes installation easy. Laser cut, fully TIG welded, beveled & de-burred for easy internal wire pulling, and polished to show their quality finish.

All of our bars are hand-made employing a multi-step manufacturing process using the finest materials. Tube diameter is 1.25” stepped down to 1” for stock/conventional controls.  Both grips have 0.5” x 2” slots laser cut for internal wiring. The throttle side is honed out and notched for fly by wire. Laser cut tubing yields the smoothest corners with no slag for easy wiring.

Cable/Electrical Description:

When many aftermarket hydraulic lines are installed, problems can arise from inferior chrome plating. There is nothing worse than rust prone, cheap imitation chrome. Based on this we go the extra mile to achieve a finish that is far superior. Our plating is done here in the USA and has been proven to reduce chipping, scratching, rusting or fading. Giving you a product that is not only suitable for practical purposes but will also look great for years to come!

Our Hydraulic Brake Lines meet or exceed D.O.T. as well as OEM pressure specifications. Our lines are UV protected braided stainless steel with a Standard/Flat Black Armor Coat, providing a long lasting appearance while protecting components from abrasion.Our Electrical Extensions use special  purpose automotive wire that is  insulated with chemically cross-line polyethylene, making it resistant to moisture, most solvents, and gives it the ability to withstand extreme temperatures.

Our Flexible Polyvinyl Chloride (PVC) Tubing is designed to meet the requirements of MIL-I-631, Grades A & B. Our PVC Tubing is UV Resistant, Flame Retardant, Lead Free with a High Gloss Black Finish, Making it perfect for applications where a wide thermal range is required. 

In 2018 the Motor Company decided to change the Cable Clutch and have implemented a very nice "Upgrade"! With this new style Cable we now have the ability to change the Top Portion of the Cable. With this New Design the Bottom Portion Completely Separates from the Top, making the "Cable Swap" Much Easier as you No Longer Need to Open the Transmission to Change to a Longer Clutch Cable. Cable Kits has decided to Make an Extension Available with this New Cable Design, making a “Longer” Clutch Cable easier to obtain. You will Simply Separate the 2 Halves, Install the Included Extension and you are Up and Running! Again, Much Easier than the Traditional Process