Gloss Black 12" MX-T Bars Non ABS Handlebar kit for 2020-2022 Harley Low Rider 'S'
Gloss Black 12" MX-T Bar Non ABS Handlebar Kit For Your 2022 Harley Davidson Low Rider 'S'
Each and every set of bars we make are hand-made employing a multi-step manufacturing process using the finest materials. With a tube diameter of 1.25”. Both grips have 0.5” x 2” slots laser cut for internal wiring. The throttle side is honed out and notched for fly by wire configurations. We pride ourselves on our smooth, clean arched corners whereas competitors often use straight, sharp edges which are easier to manufacture, but fall short of the premium styling distinguishing riders demand.
*New for 2022 Harley has opted to offer a "Non ABS" version of the Low Rider S. This option is less expensive at the Dealer, but initially more costly when installing taller bars. This configuration requires the entire front assembly be replaced as you cannot remove the upper line by itself, as you were able to with the ABS configuration. We have gone ahead and provided the entire assembly for the Non ABS configuration, as well as converted it to a similar configuration as the Stock/OEM ABS setup. With our assemble you will have the ability to, if you decide you want to go with different sized bars in the future, replace the upper line alone by simply purchasing a different sized upper line in the future. Of course this will only be possible once you have installed our complete NON ABS front brake assembly. Our Non ABS Upper Front Brake Line, for the Low Rider S, will be compatible with our Assembly only.
Now that the 2-piece cable has been around for a few years aftermarket companies are beginning to roll out solutions for them, as well as what is available from the dealer. We have also implemented our own solution to accommodate the need for a longer cable when installing taller bars. Taking our Q from great minds in our industry, we now offer an Extension for the Stock Harley Davidson 2-Piece Clutch Cable. Our Extension provides the extra length needed, all the while looking as though it came from Milwaukee, and adds an adjustment feature that gives the Stock Cable more customization than was available prior. You may feel that, even with the tension adjustment from the factory, the cable feels a bit too squishy. You may not like the feel of the "Auto" tension adjuster and simply decide to bypass it using the adjustment capabilities built right into our extension. Whatever your needs we feel this is a great solution, both functionally and aesthetically, and we're extremely confident you will too!
Our Hydraulic Brake Lines meet or exceed D.O.T. as well as OEM pressure specifications. Our lines are UV protected braided stainless steel with a smooth Black Armor Coat, providing a long lasting appearance while protecting components from abrasion.
Our Electrical Extensions use special purpose automotive wire that is insulated with chemically cross-line polyethylene, making it resistant to moisture, most solvents, and gives it the ability to withstand extreme temperatures.
Our Flexible Polyvinyl Chloride (PVC) Tubing is designed to meet the requirements of MIL-I-631, Grades A & B. Our PVC Tubing is UV Resistant, Flame Retardant, Lead Free with a High Gloss Black Finish, Making it perfect for applications where a wide thermal range is required.