100% "Plug n Play" Prewired 12" Black Meathook "Bagger Bar" 'ABS' Handlebar Kit For Harley Davidson FLH Touring 2017-2020
100% "Plug n Play" PreWired Meathook "Bagger Bar"
Handlebar Kit 2017-2020 "ABS" FLH
Harley Davidson Street Glide,Electra Glide, Ultra Limited and Tri Glide
What is it worth to have your project be as
simple as possible? We feel it’s worth everything, so we’ve gone ahead and done
ALL the hard work for you! These bars are "Pre-wired" with your
Handlebar Switch Wiring (Can-Bus) and set up with the ability to pull your
existing Twist Grip Sensor (TBW) in literally 10 mins! Those of us who have
swapped our bars know, beyond a shadow of a doubt, that wiring the new bars can
be a daunting task. This is what we set out to fix...and we did it! We are able
to provide you with a solution that literally eliminates the headache....We
were able to have our twist grip sensor pulled in 10 mins, here's the key,
WITHOUT removing the plug on the Twist Grip Sensor...That is no exaggeration!
Once this is done all that is left is to swap your hydraulics and you are done!
We all know what the dealer charges to do this, with that said any experienced
tech for that matter, and we’re EXTREMELY confident that we can save you $$$!!!
Who doesn’t wanna save $$$? Even if you deliver your bars to your Tech
with all the wiring finished and all they have to do is literally bolt on the
new bars....HUGE! Your Tech will thank you by charging you less $ to do your
installation, it's a win WIN for everyone involved!!
· 12" Gloss Black Meathook Bagger Bars
· Comes Pre-wired with 2 "Plug n Play" Handlebar Switch Wiring "Can-Bus" Harnesses, 1 on each side of the bars
· Comes Pre-Wired with a
"Plug n Play" Stock TBW Harness
· Choice of Gloss Black,
Flat Black or Midnight Black Stainless Steel lines with Black Chrome Fittings · Extended OEM/Stock
Style Hydraulic Brake Lines, 1 Upper and 2 Lower with Stock ABS Fittings as
well as Stock Piping for 1-1 Swap on your ride!
· Extended Hydraulic Clutch Line
· Matching Banjo Bolts
· Bar Diameter 1.25"
· End to End Width 36"
· 12" Rise
· 5.25" Clamping Surface
· 4.5" Pullback
· Slotted for Internal Wiring
· Gloss Black Finish
As an Authorized Dominator Industries Dealer
We are Proud to Offer Dominator "Big Daddy" Bars for Harley Davidson!
With a "Limited Lifetime" warranty they are carefully designed to
provide natural, relaxed grip angles combined with optimal pullback comfort.
Laser cut, fully TIG welded, beveled & de-burred for easy internal wire
pulling, and polished to show their quality finish!
Each and every set of bars are hand-made employing a multi-step manufacturing process using the finest materials with a tube diameter of 1.5” stepped down to 1.25" for fitment with your stock Fairing, also stepped down to 1” for stock/conventional controls. Both grips have 0.5” x 2” slots laser cut for internal wiring. The throttle side is honed out and notched for fly by wire. The
When many aftermarket hydraulic lines are
installed, problems can arise from inferior chrome plating. There is nothing
worse than rust prone, cheap imitation chrome. Based on this we go the extra
mile to achieve a finish that is far superior. Our plating is done here in the
Our Hydraulic Brake Lines meet or exceed D.O.T. as well as OEM pressure specifications. Our lines are UV protected Braided Stainless Steel with 3 different Finish options. Both our Flat Black and Gloss Black are our Standard options. These Lines are great choices for most, if not all, of our Kits as well as any application where a Black Finished Line is desired. Our Midnight Black is our "Best" Option and is made with Fiberglass Insulation for that "Notch Above" in Style and Performance. Midnight Black is similar to a "Smoked" type Line that incorporates a "Transparent" Armor Coat allowing the Braided Stainless Steel to be visible, really a Beautifully done Line! All of our "Black" Finished Lines come with our Black Chrome Fittings and a Protective Armor Coat, that provides a long lasting appearance while protecting components from abrasion.
Our Electrical Extensions use special purpose automotive wire that is insulated with chemically cross-line polyethylene, making it resistant to moisture, most solvents, and gives it the ability to withstand extreme temperatures.
Our Flexible Polyvinyl Chloride (PVC) Tubing is designed to meet the requirements of MIL-I-631, Grades A & B. Our PVC Tubing is UV Resistant, Flame Retardant, Lead Free with a High Gloss Black Finish, Making it perfect for applications where a wide thermal range is required.